John Lugalambi

• To pick and deliver flesh and frozen foods at different locations and countries.
• Operated with safety and skill to avoid accidents and delays.
• Demonstrated safe driving by following regulations and safety procedures, resulting in zero accidents.
• Obtained necessary permits and licenses to operate various commercial vehicles legally.
• Inspected trucks for malfunctions and reported vehicles to management for corrective action.
• Utilized GPS and other navigation tools to plan routes and stay on schedule.
• Maintained daily, legible DOT log book and submitted corresponding documents.
• Dropped and hooked trailers and changed configuration of equipment.
• Maximized load safety by balancing, securing, and weighing products.
• Kept accurate records of cargo delivery times and vehicle maintenance to provide documentation to dispatch for billing and inventory purposes.
• Minimized delays by planning and adjusting routes to account for changing weather and traffic conditions.
• Verified contents of inventory loads against Bills of Lading.
• Clearly communicated with dispatchers to give updated information on estimated times of arrival and latest road conditions.
• Completed regular inspections and maintenance actions, as well as basic equipment repairs, to keep equipment operating at peak levels.
• Loaded and unloaded products at warehouses and customer locations using hand trucks, pallet jacks, and forklifts.
• Monitored and managed fuel consumption and expenses for management reporting.
• Inspected truck for defects and safe operating condition before, during and after trips.
• Inspected trucks and trailers before each trip to assess safety and identify maintenance concerns.
• Fastened chains, straps, covers, and binders to secure load during transit.
• Inspected vehicle before and after trips and logged and reported mechanical problems to avoid unsafe hazards.
• Completed daily inspections, basic maintenance and common repair actions to keep equipment operating at full capacity.
• Determined quickest and safest routes for delivery by using effective planning and organizational skills.
• Documented mileage, deliveries, pickups, customer issues and damages.
• Communicated with dispatchers and other office personnel to handle two-way updates and adjust daily schedules.
• Completed routine maintenance on truck to keep in working order.
• Spoke professionally with customers regarding complaints, gathering all necessary information to make educated decisions and address issues.
• Complied with truck driving rules as well as company policies and procedures regarding safe vehicle operations.
• Maintained telephone and radio contact with supervisor to receive delivery instructions.
• Conferred with dispatch to relay delays, receive route, and adjust plans to meet daily targets.
• Completed preventive maintenance checks and basic repairs to vehicles.
• Inspected load security and checked for damages.
• Coordinated efficient routes for optimal delivery scheduling and maximum daily performance.
• Secured vehicle to tow truck and checked all attachments for safe operation.
• Managed efficient unloading of freight, inspected merchandise, and documented customer concerns for supervisor.
• Removed and unloaded packages from trailers for customer deliveries, using extreme care to avoid damage to goods.

Operate the heavy loading equipment which included Excavator and Backhoe, Bull dozer, roller compactors, dump trucks, skid steer and Lorries.

• Skilled at working independently and collaboratively in a team environment.
• Self-motivated, with a strong sense of personal responsibility.
• Proven ability to learn quickly and adapt to new situations.
• Worked well in a team setting, providing support and guidance.
• Worked effectively in fast-paced environments.
• Managed time efficiently in order to complete all tasks within deadlines.
• Demonstrated respect, friendliness and willingness to help wherever needed.
• Excellent communication skills, both verbal and written.
• Passionate about learning and committed to continual improvement.
• Proved successful working within tight deadlines and a fast-paced environment.
• Strengthened communication skills through regular interactions with others.
• Organized and detail-oriented with a strong work ethic.
• Adaptable and proficient in learning new concepts quickly and efficiently.
• Used critical thinking to break down problems, evaluate solutions and make decisions.
• Paid attention to detail while completing assignments.
• Worked flexible hours across night, weekend and holiday shifts.
• Identified issues, analyzed information and provided solutions to problems.
• Participated in team projects, demonstrating an ability to work collaboratively and effectively.
• Cultivated interpersonal skills by building positive relationships with others.
• Developed and maintained courteous and effective working relationships.

General supervision of the heavy-duty workshop to repair and maintain the Mission’s heavy trucks over 100 units, medium trucks over 20 units, Nissan Civilian buses 25 sitters 15 units, Air field equipment and Material handling equipment from 3 tons to 30 tons over 30 Units, plus other vehicles and equipment from regions.

• Fitted bearings to adjust, repair, or overhaul mobile mechanical, hydraulic and pneumatic equipment.
• Tested mechanical products and equipment after repair or assembly for proper performance and compliance with manufacturers' specifications.
• Diagnosed faults or malfunctions to determine required repairs, using engine diagnostic equipment.
• Scheduled maintenance for industrial machines and equipment and kept equipment service records.
• Removed worn or faulty components for replacement or repair.
• Inspected and tested heavy equipment components to certify proper operation and safety.
• Restored and modified equipment using welding and metal fabrication techniques.
• Replaced defective wiring systems, hydraulics, and braking systems to return machines to service.
• Troubleshot equipment malfunctions utilizing diagnostic tools and technical manuals.
• Analyzed malfunctioning equipment and determined type of repairs required.
• Repaired and replaced engine parts such as pistons, cylinders and liners to restore function.
• Reassembled and tested equipment after repairs to verify function and performance.
• Maintained meticulous records of all repair work that was made to machines and equipment.
• Developed preventative maintenance plans to limit operational disruption.
• Read and understood technical drawings, schematics, and manuals in order to make accurate updates.
• Performed routine maintenance and repairs on heavy equipment such as bulldozers and backhoes.
• Diagnosed and repaired hydraulic and electrical systems to maintain equipment function.
• Fabricated and installed custom parts and components to meet specific equipment needs.
• Selected hand tools, power tools and precision measuring instruments according to task requirements.
• Cleaned, lubricated and performed other routine maintenance work on equipment and vehicles.

• Effectively lead road convoys to deliver United Nations cargo from Entebbe Support Centre Uganda to Eastern Democratic Republic of Congo Regional offices.
• Loaded and unloaded goods and freight from tractor trailers, heavy duty trucks and flatbed vehicles.
• Reported vehicle and roadside issues in accordance with company policies to maintain route transparency.
• Managed efficient loading, unloading and security of customer freight, taking care with fragile items and diligently bracing loads, balancing weights and preventing shifting.
• Communicated regularly with dispatcher to provide updates on delivery times.
• Conducted efficient cargo transfers to maintain route schedules.
• Conducted safety inspections on truck and equipment to verify proper operation.
• Maintained telephone or radio contact with supervisor to receive delivery instructions.
• Performed basic vehicle maintenance and minor repairs.
• Reported malfunctions, accidents, traffic violations or damage to truck to supervisor.
• Inspected product load for accuracy and safely moved product load to guarantee timely and complete delivery.
• Used ropes, blocks, chains, binders and covers to secure cargo for transport.
• Dispatched for local and long-distance deliveries and arranged fuel for fleet during operations and maneuvers.
• Delivered goods to customers both locally and long distance.

Serviced vehicles according to OEM recommended maintenance schedules for oil changes, engine tune-ups and fluid changes.

• Changed, rotated, and balanced tires on different types of vehicles.
• Analyzed and located malfunctions in brakes, motors, switches, and control systems.
• Performed diagnostic and troubleshooting procedures to find and identify root causes of mechanical issues.
• Replaced damaged, missing, or defective parts with new and refurbished components.
• Completed full vehicle inspections to check for leaks, damage, or other issues of concern.
• Trained and coached junior employees on procedures for completing various types of repairs and maintenance on cars and light trucks.
• Maintained accurate records of time and materials required to perform repairs and service.
• Completed customer orders and warranty services according to manufacturer specifications.
• Tested newly installed equipment to determine proper functionality and compliance with regulations.
• Checked brake systems and determined need of pad replacement, disc turning or other maintenance requirements.
• Tuned automotive systems and components to optimize functionality and prolong life of each piece.
• Serviced air conditioning systems, changed and topped off fluids and completed maintenance inspections.
• Repaired and replaced worn and damaged components.
• Read and followed technical documentation to complete accurate repairs.
• Repaired brake, exhaust, electrical and other systems for domestic automotive brands.
• Explained maintenance and repair needs to customers and offered advice on preventative maintenance.
• Investigated customer complaints to identify cause of malfunctions.
• Tore down, repaired and rebuilt faulty assemblies such as power systems, steering systems and linkages.
• Coordinated with parts department to determine availability of necessary components.
• Inspected damaged vehicles to estimate repair labor cost and required parts expense.
• Explained estimates and determined repair timelines to manage customer expectations.
• Implemented tracking systems to monitor parts inventory and transactions to reduce discrepancies.
• Delegated and supervised vehicle bodywork to body team for restoration and remediation.
• Corrected faults and maximized performance by rebuilding systems and individual components.
• Inspected and tested vehicles and completed preventive maintenance such as engine tune-ups, oil changes, tire rotations, wheel balancing, and filter replacement.
• Kept equipment in good working order by following operating instructions, troubleshooting breakdowns, and maintaining supplies.

• Conducted general maintenance procedures on schedule.
• Performed basic welding, brazing and soldering.
• Performed weekly inspections of lifting equipment.
• Ordered, modified and fabricated parts to complete repairs.
• Reassembled and tested equipment after repairs to verify function and performance.
• Selected hand tools, power tools and precision measuring instruments according to task requirements.
• Read and understood technical drawings, schematics, and manuals in order to make accurate updates.
• Troubleshot equipment malfunctions utilizing diagnostic tools and technical manuals.
• Maintained meticulous records of all repair work that was made to machines and equipment.
• Performed routine maintenance and repairs on heavy equipment such as bulldozers and backhoes.
• Developed preventative maintenance plans to limit operational disruption.
• Repaired and replaced engine parts such as pistons, cylinders and liners to restore function.
• Removed worn or faulty components for replacement or repair.
• Inspected and tested heavy equipment components to certify proper operation and safety.
• Diagnosed and repaired hydraulic and electrical systems to maintain equipment function.
• Analyzed malfunctioning equipment and determined type of repairs required.
• Replaced defective wiring systems, hydraulics, and braking systems to return machines to service.
• Fabricated and installed custom parts and components to meet specific equipment needs.
• Restored and modified equipment using welding and metal fabrication techniques.

• Skilled at working independently and collaboratively in a team environment.
• Self-motivated, with a strong sense of personal responsibility.
• Proven ability to learn quickly and adapt to new situations.
• Worked well in a team setting, providing support and guidance.
• Worked effectively in fast-paced environments.
• Managed time efficiently in order to complete all tasks within deadlines.
• Demonstrated respect, friendliness and willingness to help wherever needed.
• Excellent communication skills, both verbal and written.
• Passionate about learning and committed to continual improvement.
• Proved successful working within tight deadlines and a fast-paced environment.
• Strengthened communication skills through regular interactions with others.
• Organized and detail-oriented with a strong work ethic.
• Adaptable and proficient in learning new concepts quickly and efficiently.
• Used critical thinking to break down problems, evaluate solutions and make decisions.
• Paid attention to detail while completing assignments.
• Worked flexible hours across night, weekend and holiday shifts.
• Developed and maintained courteous and effective working relationships.
• Identified issues, analyzed information and provided solutions to problems.
• Participated in team projects, demonstrating an ability to work collaboratively and effectively.
• Cultivated interpersonal skills by building positive relationships with others.

• Conducted general maintenance procedures on schedule.
• Estimated repair time and costs and recommended outside contractors for certain work.
• Ordered, modified and fabricated parts to complete repairs.
• Performed basic welding, brazing and soldering.
• Performed weekly inspections of construction equipment.
• Reassembled and tested equipment after repairs to verify function and performance.
• Selected hand tools, power tools and precision measuring instruments according to task requirements.
• Read and understood technical drawings, schematics, and manuals in order to make accurate updates.
• Maintained meticulous records of all repair work that was made to machines and equipment.
• Troubleshot equipment malfunctions utilizing diagnostic tools and technical manuals.
• Performed routine maintenance and repairs on heavy equipment such as bulldozers and backhoes.
• Developed preventative maintenance plans to limit operational disruption.
• Removed worn or faulty components for replacement or repair.
• Inspected and tested heavy equipment components to certify proper operation and safety.
• Diagnosed and repaired hydraulic and electrical systems to maintain equipment function.
• Analyzed malfunctioning equipment and determined type of repairs required.
• Replaced defective wiring systems, hydraulics, and braking systems to return machines to service.
• Fabricated and installed custom parts and components to meet specific equipment needs.
• Repaired and replaced engine parts such as pistons, cylinders and liners to restore function.
• Restored and modified equipment using welding and metal fabrication techniques.

• Junior mechanic and trainee on both vehicles and construction machines
• Repair of concrete mixers, vibrators, roller compactors, and concrete dumpers.
• Self-motivated, with a strong sense of personal responsibility.
• Proven ability to learn quickly and adapt to new situations.
• Worked well in a team setting, providing support and guidance.
• Worked effectively in fast-paced environments.
• Managed time efficiently in order to complete all tasks within deadlines.
• Demonstrated respect, friendliness and willingness to help wherever needed.
• Excellent communication skills, both verbal and written.
• Passionate about learning and committed to continual improvement.
• Proved successful working within tight deadlines and a fast-paced environment.
• Strengthened communication skills through regular interactions with others.
• Organized and detail-oriented with a strong work ethic.
• Adaptable and proficient in learning new concepts quickly and efficiently.
• Used critical thinking to break down problems, evaluate solutions and make decisions.
• Paid attention to detail while completing assignments.
• Worked flexible hours across night, weekend and holiday shifts.
• Developed and maintained courteous and effective working relationships.
• Identified issues, analyzed information and provided solutions to problems.
• Participated in team projects, demonstrating an ability to work collaboratively and effectively.
• Cultivated interpersonal skills by building positive relationships with others.